RFR: JDK-8213199: GC abstraction for Assembler::needs_explicit_null_check()

Erik Österlund erik.osterlund at oracle.com
Fri Nov 2 11:51:00 UTC 2018


Hi Roman,

On 2018-11-01 17:58, Roman Kennke wrote:
> Hi Erik,
> 
>> Would you mind explaining how you need to override this and why? I'm
>> afraid I did not quite get it from your description in the RFC (which is
>> also why I didn't come up with a solution either).
>>
>> Am I correct that you need to return false if the passed in offset is
>> the cell header offset -8, or is there anything else at all required to
>> that logic?
> 
> No, it's really just that. Plus take care of it in the case of combined
> narrow-oops-offset plus -8.

>> You mentioned something about the high order byte being
>> masked on AArch64, but didn't quite connect the dot to how that is
>> related to this code. Is it?
> 
> Yes, we also need to mask the high order byte in AArch64 because of the
> way addressing works on that platform, and because -8 flips on those
> negative bits.

Okay. Looking at 
https://builds.shipilev.net/patch-openjdk-shenandoah-jdk/latest/src/hotspot/share/asm/assembler.cpp.udiff.html 
that you posted before, assuming this is how it will be extended.

So in the case with a heap base, the resulting address will never be 
negative, and you know it will trap (presuming there is an mprotected 
page at offset -8 from the heap base pointer. So it seems in this case, 
the check could have just been offset == -8.

So let's say we access null -8 without a heap base then. The address 
becomes 0xFFFFFFFFFFFFFFF8. When that traps, the value you see in the 
signal handler becomes 0x00FFFFFFFFFFFFF8 because of the virtual address 
masking of the high order byte. I presume that is what the AArch64 code 
is dealing with. But I don't quite understand why. Addresses starting 
with 0x00FF are not valid in user space so we never need to worry about 
any memory being mapped in there accidentally. So I'm not sure what this 
code protects against.

So that takes me back to my original intuition: isn't this the same as 
checking at the very top: if (offset == BrooksPointer::byte_offset()) 
return false;

If it really is as simple as just that, and I did not miss something not 
obvious, then perhaps we would be better off abstracting a cell header 
check here, as opposed to wrapping the whole thing in a virtual member 
function. Especially since there are now a number of these occurrences 
where some basic knowledge about cell header size that is 0 for all GCs 
except Shenandoah where it is 8, leaves us wrapping a whole bunch of 
stuff behind a GC interface, only to handle that one difference.

While I don't know exactly what this cell abstraction would reasonably 
look like in its full shape, perhaps we could start with something 
simple like a virtual member function size_t cell_header_size() on 
CollectedHeap with a suitable comment explaining that a cell header is a 
GC thing we sometimes put above the object header. And then see if there 
are more related functions that lead us to a helper class for cells or 
something like that.

I'm open to suggestions of course. Thought I'd check with you if this 
sounds sane to you. Of course if my assumption is wrong that this check 
could be written much simpler than it looks like, then I suppose I need 
to give up on that idea. It all boils down to that really.

Thanks,
/Erik

> Also, the mach5 job came back with FAILED (see below). Can somebody with
> access check and see what's up?
> 
> Thanks,
> Roman
> 
> 
> Build Details: 2018-11-01-1146402.roman.source
> 0 Failed Tests
> Mach5 Tasks Results Summary
> 
>      EXECUTED_WITH_FAILURE: 6
>      KILLED: 0
>      UNABLE_TO_RUN: 21
>      PASSED: 48
>      FAILED: 0
>      NA: 0
>      Build
> 
>          6 Executed with failure
>              solaris-sparcv9-solaris-sparcv9-build-8 error while
> building, return value: 2
>              solaris-sparcv9-debug-solaris-sparcv9-build-9 error while
> building, return value: 2
>              windows-x64-windows-x64-build-10 error while building,
> return value: 2
>              windows-x64-debug-windows-x64-build-11 error while building,
> return value: 2
>              windows-x64-open-windows-x64-build-12 error while building,
> return value: 2
>              windows-x64-open-debug-windows-x64-build-13 error while
> building, return value: 2
>          2 Not run
>              solaris-sparcv9-install-solaris-sparcv9-build-16 Dependency
> task failed: mach5...-8300-solaris-sparcv9-solaris-sparcv9-build-8
>              windows-x64-install-windows-x64-build-17 Dependency task
> failed: YJftjiBUYc
> 
>      Test
> 
>          19 Not run
> 
> tier1-solaris-sparc-open_test_hotspot_jtreg_tier1_common-solaris-sparcv9-57
> Dependency task failed:
> mach5...-8300-solaris-sparcv9-solaris-sparcv9-build-8
> 
> tier1-solaris-sparc-open_test_hotspot_jtreg_tier1_common-solaris-sparcv9-debug-58
> Dependency task failed:
> mach5...solaris-sparcv9-debug-solaris-sparcv9-build-9
> 
> tier1-product-open_test_hotspot_jtreg_tier1_common-windows-x64-20
> Dependency task failed: YJftjiBUYc
> 
> tier1-debug-open_test_hotspot_jtreg_tier1_common-windows-x64-debug-26
> Dependency task failed: YJftjiBVYc
> 
> tier1-debug-open_test_hotspot_jtreg_tier1_compiler_1-windows-x64-debug-29 Dependency
> task failed: YJftjiBVYc
> 
> tier1-debug-open_test_hotspot_jtreg_tier1_compiler_2-windows-x64-debug-32 Dependency
> task failed: YJftjiBVYc
> 
> tier1-debug-open_test_hotspot_jtreg_tier1_compiler_3-windows-x64-debug-35 Dependency
> task failed: YJftjiBVYc
> 
> tier1-debug-open_test_hotspot_jtreg_tier1_compiler_not_xcomp-windows-x64-debug-38
> Dependency task failed: YJftjiBVYc
> 
> tier1-debug-open_test_hotspot_jtreg_tier1_gc_1-windows-x64-debug-41
> Dependency task failed: YJftjiBVYc
> 
> tier1-debug-open_test_hotspot_jtreg_tier1_gc_2-windows-x64-debug-44
> Dependency task failed: YJftjiBVYc
>              See all 19...
> 
> 
> 
>> Thanks,
>> /Erik
>>
>> On 2018-11-01 12:20, Roman Kennke wrote:
>>> Hi Kim, thanks for reviewing! I'll push it through jdk/submit now.
>>>
>>> Erik: ok for you too?
>>>
>>> Thanks,
>>> Roman
>>>
>>>
>>>>> On Oct 31, 2018, at 6:14 PM, Roman Kennke <rkennke at redhat.com> wrote:
>>>>>
>>>>> Hi Erik,
>>>>>
>>>>> right. Fixed this, and what what Kim mentioned plus a missing include:
>>>>>
>>>>> Incremental:
>>>>> http://cr.openjdk.java.net/~rkennke/JDK-8213199/webrev.01.diff/
>>>>> Full:
>>>>> http://cr.openjdk.java.net/~rkennke/JDK-8213199/webrev.01/
>>>>>
>>>>> Ok now?
>>>> Looks good.
>>>>
>>
> 


More information about the hotspot-gc-dev mailing list