value type hygiene
frederic.parain at oracle.com
Fri May 11 14:39:14 UTC 2018
I have a question about the semantic within legacy class files (class
files lacking a ValueTypes attribute). Your document clarifies the semantic
for fields as follow:
"Meanwhile, C is allowed to putfield and getfield null all day long into its own fields (and fields of other benighted legacy classes that it may be friends with). Thus, the getfield and putfield instructions link to slightly different behavior, not only based on the format of the field, but also based on “who’s asking”. Code in C is allowed to witness nulls in its Q fields, but code in A (upgraded) is not allowed to see them, even though it’s the same getfield to the same symbolic reference. Happily, fields are not shared widely across uncoordinated classfiles, so this is a corner case mainly for testers to worry about.”
But what’s about arrays? If I follow the same logic that “old code needs to
be left undisturbed if possible”, if a legacy class C creates an array of Q,
without knowing that Q is now a value type, C would expect to be allowed
to write and read null from this array, as it does from its own fields. Is it a
This would mean that the JVM would have to make the distinction between
an array of nullable elements, and an array of non-nullable elements. Which
could be a good thing if we want to catch leaking of arrays with potentially
null elements from old code to new code, instead of waiting for new code
to access a null element to throw an exception. In the other hand, the lazy
check solution allows arrays of non-nullable elements with zero null elements
to work fine with new code.
From an implementation point of view, the JVM already has to make the
distinction between flattened and not flattened arrays, so there’s a logic
in place to detect some internal constraints of arrays, but the nullable/
non-nullable element semantic would require one additional bit.
> On May 6, 2018, at 05:17, John Rose <john.r.rose at oracle.com> wrote:
> Like many of us, I have been thinking about the problems of keeping values, nulls,
> and objects separate in L-world. I wrote up some long-ish notes on the subject.
> I hope it will help us wrap our arms around the problem, and get it solved.
> TL;DR: Remi was right in January. We need a ValueTypes attribute.
> — John
> P.S. Raw markdown source follows for the record.
> # Value Type Hygiene
> #### May 2018 _(v. 0.1)_
> #### John Rose and the Valhalla Expert Group
> Briefly put, types in L-world are ambiguous, leading to unhygienic
> mixtures of value operations with reference operations, and
> uncontrolled pollution from `null`s infecting value code.
> This note explores a promising proposal for resolving the key
> ambiguity. It is a cleaner design than the ad hoc mechanisms tried so
> far. The resulting system would seem to allow more predictable and
> debuggable behavior, a stronger backward compatibility story, and
> better optimization.
> ## Problem statement
> In the _L-world_ design for value types, the classfile type descriptor
> syntax is left unchanged, and the pre-existing descriptor form
> `"LFoo;"` is overloaded to denote value types as well as object types.
> A previous design introoduced new descriptors for value types of the
> form `"QFoo;"`, and possibly a union type `"UFoo;"`. This design
> might be called _Q-world_. In comparison with Q-world, the L-world
> design approach has two advantages--compatibility and migration--but
> also one serious disadvantage: ambiguity.
> L-world is _backward compatible_ with tools that must parse classfile
> descriptors, since it leaves descriptor syntax unchanged. There have
> been no changes to this syntax in almost thirty years, and there is a
> huge volume of code that depends on its stability. The HotSpot JVM
> itself makes hundreds of distinct decisions based on descriptor syntax
> which would need careful review and testing if they were to be adapted
> to take account of a new descriptor type (`"QFoo;"`, etc.).
> Because of its backward compatibility, L-world also has a distinctly
> simpler _migration story_ than previous designs. Some _value-based
> classes_, such as `Optional` and `LocalTime`, have been engineered to
> be candidates for migration to proper value types. We wish to allow
> such a migration without recompiling the world or forcing programmers
> to recode uses of the migrated types. It is very difficult to sustain
> the illusion in Q-world that a value type `Qjava/util/Optional;` can
> be operated on in old code under the original object type
> `Ljava/util/Optional;`, since the descriptors do not match and a
> myriad of adapters must be spun (one for every mention of the wrong
> descriptor). With L-world, we have the simpler problem (addressed in
> this document) of keeping straight the meaning of L-descriptors
> in each relevant context, whether freshly recompiled or legacy
> code; this is a simpler problem than spinning adapters.
> But not all is well in L-world. The compatibility of descriptors
> implies that, when a classfile must express a semantic distinction
> between a reference type and an object type, it must be allowed to do
> so unambiguously, in a side channel outside of the descriptor.
> Our first thought was, "well, just load all the value types and then
> you will know the list of them". If we have a global registry of
> classes (such as the HotSpot system dictionary), nobody needs to
> express any additional distinctions, since everybody can just ask the
> register which are the value types.
> This simple idea has a useful insight, but it goes wrong in three
> ways. First, for some use cases such as classfile transformation, it
> might be difficult to find such a global registry; in some cases we
> might prefer to rely on local information in the classfile. We need a
> way for a classfile to encode, within itself, which types it is using
> as value types, so that all viewers of the classfile can make
> consistent decisions about what's a value and what's not.
> Second, if we are running in the JVM, the global registry of value
> types has to be built up by loading classfiles. In order for every
> classfile that _uses_ a value type to know its status, the classfile
> the _defines_ the value type must be loaded _first_. But there is no
> way to totally order these constraints, since it is easy to create
> circular dependencies between value types, either directly or
> indirectly. (N.B. Well-foundedness rules for layout don't eliminate
> all the possible circularities.) And it won't work to add more
> initialization phases ("first load all the classfiles, then let them
> all start asking questions about their contents"), because that would
> require preloading a classfile for every potential value type
> mentioned in some other classfile. That's every name in every
> `"LFoo;"` descriptor. Loading a file for every name mentioned
> anywhere is very un-Java-like, and something that drastic would be
> required in order to make correct decisions about value types.
> That leads to the third problem, which comes from our desire to make a
> migration story. Some classfiles need to operate on value types as if
> they were object references. (Below, we will see details of how
> operations can differ between value and reference types.) This means
> that, if we are to support migration, we need a way for legacy
> classfiles to make a _local_ decision to treat a given type as a
> reference type, for backward compatibility. Luckily, this is
> possible, but it requires a local indication in the classfile so the
> JVM can adjust certain operations.
> A solution to these problems requires a way for each classfile to
> declare how it intends to use each type that is a value type, and
> (what is more) a way for legacy classfiles to peacefully interoperate
> with migrated value types. We have experimented with various partial
> solutions, such as adding an extra bit in a context where a value type
> may occur, to let the JVM know that the classfile intends a value
> type. (This is the famous `ACC_FLATTENABLE` bit on fields.) But it
> turns out that the number of places where value-ness is significant is
> hard to limit to just a few spots where we can sprinkle a mode bit.
> We need a _comprehensive_ solution that can clearly and consistently
> define a classfile's (local) view of the status of each type it works
> with, so that when the "value or reference?" question comes up, there
> is a clear and consistent answer. We need to prevent the values and
> the references from polluting each other; we need _value type
> ## Value vs. reference operations
> Value types can be thought of as simpler than reference types, because
> they lack two features of reference types:
> - _identity:_ Two value types with the same immediate components are
> indistinguishable, even if they were created by different code
> paths. Objects, by contrast, "remember" when they were created,
> and each object is a unique identity. Identities are
> distinguished using the `acmp` family of instructions, and Java's
> `==` operator.
> - _nullability:_ Any variable of any reference type can store the
> value `null`; in fact, `null` is the initial value for fields and
> array elements. So `null` is one of the possible values of any
> reference type, including `Object` and all interfaces. By
> contrast, `null` is _not_ the value of any value type. Value type
> variables are not nullable, because `null` is a reference. (But
> read on for an awkward exception.) The type `Object` can
> represent all values and references. Casting an unknown operand
> of type `Object` to a value type `Foo` must succeed if in fact the
> operand is of type `Foo`, but a null `Object` reference must never
> successfully cast to a value type.
> This strong distinction between values and references is inspired, in
> part, by the design of Java's primitive types, which also are identity
> free and are not nullable. Every copy of the `int` value 42 is
> completely indistinguishable from every other copy, and you can't cast
> a `null` to `int` (without a null pointer exception). We hope
> eventually to unify value types and primitives, but even if this
> never comes to pass, our design slogan for value types is, _codes
> like a class, works like an int_.
> By divesting themselves of identity and nullability, value types are
> able to enjoy new behaviors and optimizations akin to those of
> primitives, notably flattening in the heap and scalarization in
> compiled code.
> To unlock these benefits, the JVM must treat values and references
> as operationally distinct. Some of these operational distinctions
> are quite subtle; some required months of discussion to elucidate,
> though soon (we hope) they will be obvious in hindsight.
> Here is a partial list of cases where the JVM should be able to
> distinguish value types from reference types:
> - _instance fields:_ A value field should be flattened (if possible)
> to components in adjacent memory words. A reference field must
> not be flattened, in order to retain identity and store the null
> - _static fields:_ A static field must be properly initialized
> to the default value of its type, not to null. This holds true
> for all fields, in fact. Flattening does not seem to be important
> for static fields.
> - _array elements:_ An element of a value array (array whose
> component type is a value type) should flatten its elements and
> arrange them compactly in successive memory locations. Such
> an array must be initialized to the default value of its value
> type, and never to `null`.
> - _methods:_ A value parameter or return value should be
> flattened (if possible) to components in registers. A reference
> must not be treated this way, because of identity and nullability.
> - _verifier:_ The verifier needs to know value types, so it can
> forbid inapplicable operations, such as `new` or `monitorenter`.
> - _conversions:_ The `checkcast` operator for a value type might
> reject `null` (as well as rejecting instances of the wrong type).
> The `ldc` of a dynamic constant of value type must not produce
> `null` (instead it must fail to link).
> _ _comparisons:_ The `acmp` operator family must not detect
> value type identities (since they are not present), so it must
> operate differently on values and references. In some cases,
> the verifier might reject `acmp` altogether.
> - _optimization:_ The JIT needs to know whether it can discard
> any internal reference (for a value type) and just explode the
> value into registers. The possibility of `null` mixing with
> value types.
> This list can be tweaked to make it shorter, by adjusting the rules in
> ways that lessen the impact of ambiguity in type names. The list is
> also incomplete. (We will add to it later.) Each point of
> distinction is the subject of detailed design trade-offs, many of
> which we are sketching here.
> Some of these distinctions can be pushed to instruction link time
> (when resolved value classes may be present) or run time (when the
> actual values are on stack). A dynamic check can make a final
> decision, after all questions of value-ness are settled. This seems
> to be a good decision for `acmp`. The linkage of a `new` instruction
> can fail on a value class, or a `checkcast` instruction can reject
> inspected as part of the dynamic execution of operations like `new`.
> But this delaying tactic doesn't always work. For example, field
> layout must be computed during class loading, which (as was seen
> above) is too early to use the supposed global list of value types.
> Even if some check can be delayed, like the detection of an erroneous
> `new` on a value type, we may well decide it is more useful (or
> "hygienic") to detect the error earlier, such as at verification time,
> so that a broken program can be detected before it starts to run.
> Also, some operations may be contextual, to support backward
> compatibility. Thus, `checkcast` may need to consult the local
> classfile about whether to reject nulls, so that legacy code won't
> suddenly fail to verify or execute just because it mixes nulls with
> (what it thought were) references. Basically, a "legacy checkcast"
> should work correctly with nulls, while an "upgraded checkcast" should
> probably reject nulls immediately, without requiring extra tests.
> We will examine these points in more detail later, but now we need to
> examine how to contextualize information about value types.
> ## Towards a solution
> What is to be done? The rest of this note will propose some solutions
> to the problem of value type hygiene, and specifically the problem of
> preventing nulls from mixing with values ("null hygiene").
> Both Remi Forax[] and Frederic Parain[] have proposed the idea
> of having each classfile explicitly declare the list of all value
> types that it is using. For the record, this author initially
> resisted the idea[] as overkill: I was hoping to get away with a
> band-aid (`ACC_FLATTENABLE`), but have since realized we need a more
> aggressive treatment. Clean and tidy behavior from the JVM will make
> it easier to implement clean and tidy support for value types in the
> Java language.
> []: http://mail.openjdk.java.net/pipermail/valhalla-dev/2018-January/003685.html
> []: http://mail.openjdk.java.net/pipermail/valhalla-dev/2018-January/003699.html
> []: http://mail.openjdk.java.net/pipermail/valhalla-dev/2018-January/003687.html
> Throughout the processing of the classfile, the list can serve as a
> reliable local registry of decisions about values vs. references.
> First we will sketch the attribute, and then revisit the points above
> to see how the list may be used.
> ## The `ValueTypes` attribute
> As proposed above, let us define a new attribute called `ValueTypes`
> which is simply a counted array of `CONSTANT_Class` indexes. Each
> indexed constant is loaded and checked to be a value type. The JVM
> uses this list of locally declared value types for all further
> decisions about value types, relative to the current class.
> As a running reference, let's call the loaded class `C`. `C` may be
> any class, either an object or a value. The value types locally
> declared by `C` we can call `Q`, `Q1`, `Q2`, etc. These are exactly
> the types which would get `Q` descriptors in Q-world.
> As an attribute, `ValueTypes` is somewhat like the `InnerClasses`
> attribute. Both list all classes, within the context a particular
> classfile, which need some sort of special processing. The
> `InnerClasses` attribute includes additional data for informing the
> special processing (including the break down of "binary names" into
> outer and inner names, and extra modifier bits), but the `ValueTypes`
> attribute only needs to mention the classes which are known to be
> value types.
> Already with the `ACC_FLATTENABLE` bit we have successfully defined
> logic that pre-loads a supposed value type, ensures that it _is_ in
> fact a value type, and then allows the JVM to use all of the necessary
> properties of that value type to improve the layout of the current
> class. The classes mentioned in `ValueTypes` would be pre-loaded
> similarly. In fact, the `ACC_FLATTENABLE` bit is no longer needed,
> since the JVM can simply flatten all fields whose type names are
> mantioned in the local `ValueTypes` list.
> We now come to the distinction between properly resolved classes
> (`CONSTANT_Class` entries) and types named in descriptors. This
> distinction is important to keep in mind. Once a proper class
> constant `K` is resolved by `C`, everything is known about it, and a
> permanent link to `K` goes into `C`'s constant pool. The same is not
> true of other type names that occur within field and method
> descriptors. In order for `C` to check whether its field type `"LK;"`
> is a value type, it must _not_ try to resolve `K`. Instead it must
> look for `K` _by name_ in the list of locally declared value types.
> Later on, when we examine verifier types and the components of method
> descriptors a similar by-name lookup will be necessary to decide
> whether they refer to value types. Thus, there are two ways a type
> can occur in a classfile and two ways to decide if it is a value type:
> By resolving a proper constant `K` and looking at the metadata, and by
> matching a name `"LK;"` against the local list. Happily, the answers
> will be complete and consistent if all the queries look at the same
> So a type name can be classified as a value type without resolution,
> by looking for the same name in the names of the list of declared
> value types. And this can be done even before the list of declared
> value types is available. This means that any particular declared
> value types might not need to be loaded until "hard data" is required
> of it. A provisional determination of the value status of some `Q`
> can be made very early before `Q`'s classfile is actually located and
> pre-loaded. That provision answer might be enough to check some early
> structural constraint. It seems reasonable to actually pre-load the
> `Q` values lazily, and only when the JVM needs hard data about `Q`,
> like its actual layout, or its actual supers.
> What if an element of `ValueTypes` turns out to be a reference type?
> (Perhaps someone deployed a value-type version of `Optional` but then
> got cold feet; meanwhile `C` is still using it under the impression it
> is a value type.) There are two choices here, loose and strict,
> either pretend the type wasn't there anyway, or raise an error in the
> loading of the current classfile. The strict behavior is safer; we
> can loosen it later if we find a need. The case of an element failing
> to load at all can be treated like the previous problem, either
> loosely or strictly; strict is better all else being equal.
> The strict treatment is also more in line with how to treat failed
> resolution of super-types, which are a somewhat similar kind of
> dependency: Super-types, like value types, are loaded as early as
> possible, and play a role in all phases of classfile loading, notably
> One corollary of making the list an attribute is that it can be easily
> stripped, just like `InnerClasses` or `BootstrapMethods`. Is this a
> bug or a feature? In the case of `InnerClasses`, stripping the
> attribute doesn't affect execution of the classfile but it does break
> some Core Reflection queries. In the case of `BootstrapMethods`, the
> structural constraints on dynamic constant pool constants will break,
> and the classfile will promptly fail to load. The effect of removing
> a `ValueTypes` attribute is probably somewhere in between. Because
> L-world types are ambiguous, and because we specifically allow value
> types to be used as references from legacy classfiles (for migration),
> there's always a way to "fake" enough reference behavior from a value
> type in a classfile which doesn't make special claims about it. So it
> seems reasonable to allow `ValueTypes` to be stripped, at least in
> principle. At a worst case the classfile will fail to load, as in the
> case of a stripped `BootstrapMethods`, but the feature might actually
> prove useful (say, for before-and-after migration testing).
> Note that in principle a classfile generator could choose to ignore a
> value type, and treat it as a (legacy) reference type. Because of
> migration, the JVM must support at least some such moves, but such
> picking and choosing is not the center of our design. In particular,
> we do not want the same compilation unit to treat a type as a value
> type in one line of code, and a reference type in the next. This may
> come later, if we decide to introduce concepts of nullable values
> and/or value boxes, but we think we can defer such features.
> So for now, classfiles may differ among themselves about which types
> are value types, but within a single classfile there is only one
> source of local truth about value types. (Locally-sourced, fresh,
> hygienic data!)
> ## Value types and class structure
> Very early during class loading, the JVM assigns an instance layout to
> the new class `C`. Before that point it must first load the declared
> value types (`Q1`, `Q2`, ...), and then recursively extract the layout
> information from each one. There is no danger of circularity in this
> because a value type instance cannot contain another instance of
> itself, directly or indirectly.
> Both non-static and static fields of value type make sense (because a
> value "works like an int"). But static fields interact differently
> with the loading process than non-static fields.
> A static value type field has no enclosing instance, unless the JVM
> chooses to make one secretly. Therefore it doesn't need to be
> flattened. The JVM can make an invisible choice about how to store a
> static value type field:
> - Buffered immutably on the heap and stored by (invisible) reference
> next to the other statics. The `putstatic` instruction would
> put the new value in a _different_ buffer and change the pointer.
> - Buffered mutably somewhere, with the pointer stored next to
> the other statics, or in metadata. The `putstatic` instruction
> would store the flattened value into the _same_ buffer.
> - Flattened fully into the same container as the other statics.
> The first option seems easiest, but the second might be more
> performant. The third difficult due to bootstrapping concerns.
> In fact, the same implementation options apply for non-statics as for
> statics, but only the third one (full flattening) is desirable. The
> first one (immutable buffering) may be useful as a fallback
> implemmentation technique for special cases like jumbo values and
> fields which are `volatile`, and thus need to provide atomicity.
> The root container for all of `C`'s statics, in HotSpot, happens to be
> the relevant the `java.lang.Class` value `C.class`. Presumably it's a
> good place to put the invisible pointers mentioned above.
> A static field of value type `Q` cannot make its initial value
> available to `getfield` until `Q`'s `<clinit>` method runs, (or in the
> case of re-entrant initialization, has at least started). Since
> classes can circularly refer to instances of each other via static
> references, `Q` might return the favor and require materialization of
> The first time `C` requires `Q`'s default value, if `Q` has not been
> initialized, its `<clinit>` method should run. This may trigger
> re-entry into the initializer for `C`, so `Q` needs to get its act
> together _before_ it runs its `<clinit>`, and immediately create `Q`'s
> own default value, storing it somewhere in `Q`'s own metadata (or else
> the `Class` mirror looks like a good spot). The invariant is that,
> before `Q`'s class initializer can run one bytecode, the default value
> for `Q` is created and registered for all time. Creating the default
> value before the initializer runs is odd but harmless, as long as no
> bytecode can actually access the default value without triggering
> `Q`'s initialization.
> This also implies that `C` should create and register its own default
> value (if it is a value type) before it runs its own `<clinit>`
> method, lest `Q` come back and ask `C` for its value type.
> The JVM may be required to bootstrap value-type statics as invisible
> null pointers, which are inflated (invisibly by the `getstatic` and/or
> `putstatic` instructions) into appropriate buffers, after ensuring the
> initialization of the value type class. But it seems possible that if
> the previous careful sequencing is observed, there is no need to do
> lazy inflation of nulls, which would simplify the code for `getstatic`
> and `putstatic`.
> ## Value types and method linkage
> A class `C` includes methods as well as fields, of course. A method
> can receive or return a value type `Q` simply by mentioning `Q` as a
> component of its method descriptor (as an L-descriptor `"LQ;"`).
> If a method `C.m()LD;` mentions some type `D` which is not on the
> declared list, then that type `D` will be treated, like always, as a
> nullable, identity-bearing reference.
> Interestingly, migration compatibility requires this to be the case
> whether or not `D` is in actual fact a value type. If `C` is
> unconscious of `D`'s value-ness, the JVM must respect this, and
> preserve the illusion that `D` values are "just references, nothing to
> see here, move along". Perhaps `D` is freshly upgraded to a value
> type, and `C` isn't recompiled yet. `C` should not be penalized
> for this change, if at all possible.
> This points to a core decision of the L-world design, that nearly all
> of the normal operations on object references "just do the right
> thing" when applied to value types. The two kinds of data use the
> same descriptor syntax. Value types can be converted to `Object`
> references, even though the resulting pseudo-reference does not expose
> any identity (and will never be null). Instructions like `aload`
> operate on values just as well as references, and so on.
> Basically, values in L-world routinely go around lightly disguised as
> references, special pseudo-references which do not retain object
> identity. As long as nobody looks closely, the fiction that they are
> references is unbroken. If someone tries a `monitorenter`
> instruction, the game is over, but we think those embarassing moments
> will be rare.
> On the other hand, if a method `C.m()LQ;` uses a locally-declared
> value type, then the JVM has some interesting options. It may choose
> to notice that the `Q`-value is not nullable, has no identity. It can
> adjust the calling sequence of `m` to work with undisguised "naked
> values", which are passed on the stack, opr broken into components for
> transport across the method API. This would almost be a purely
> invisible decision, except that naked values cannot be null, and so
> such calling sequences are hostile to null. Again, it "works like an
> int". A null `Integer` value will do just the same thing if you try
> to pass it to an `int`-recieving method. So we have to be prepared
> for an occasional embarassing NPE, when one party thinks a type is a
> nullable reference type and the other party knows it's a value type.
> One might think that it is straightforward to assign a value-using
> method a calling sequence by examining the method signature and the
> locally declared value types of the declaring class. But in fact
> there are non-local constraints. Only static and private methods
> can easily be adjusted to work with naked values.
> Unlike fields, methods can override similar methods in some `C`'s
> super-type `S`. This immediately leads to the possibility of `C` and
> `S` differing as to the status of some type `X` in the method's
> signature. If neither of the `ValueTypes` lists of `C` and `S`
> mentions `X`, then the classes are agreed that `X` is an object type
> (even if in truth it happens to be a value type). They can agree
> to use a reference-based calling sequence for some `m` that works
> with `X`.
> If both lists mention some `Q`, then both classes agree, and in fact
> it must be a value type. They might be able to agree to use "naked
> values" for the `Q` type when calling the method. Or not: they still
> have to worry about other supers that might have another opinion about
> What if `C` doesn't list `Q` but `S` does, and they share a method
> that returns `Q`? For example, what about `C.m()Q` vs. `S.m()Q`? In
> that case, the JVM may have already set up `S.m` to return its `Q`
> result as a naked value. Probably this happend before `C` was even
> loaded. The code for `C.m` will expect simply to return a normal
> reference. In reality, it will be unconsciously holding a
> JVM-assigned pseudo-reference to the buffered `Q`-value. The JVM must
> then unwrap the reference into a naked value to match the calling
> sequence it assigned (earlier, before `C` was loaded) to `S.m`. The
> bottom line is that even though `C.m` was loaded as a
> reference-returning function, the JVM may secretly rewrite it to
> return a naked value.
> Since `C.m` returns a reference, it might choose to return `null`.
> What happens then? The secretly installed adaptation logic cannot
> extract the components of a buffer that doesn't exist. A
> `NullPointerException` must be thrown, at the point where `C.m` is
> adapted to `S.m`, which has the greater knowledge that `Q` is value
> type (hence non-nullable). It will be as if the `areturn` instruction
> of `C.m` included a hidden null check.
> Is such a hidden null check reasonable? One might explain that the
> `C` code thinks (wrongly) it is working with boxes, while the `S` code
> _knows_ it is working with values. If the method were `C.m()Integer`
> and it were overriding `S.m()int`, then if `C.m` returns `null` then
> the adapter that converts to `S.m()int` must throw NPE during the
> implicit conversion from `Integer` to `int`. A value "works like an
> int", so the result must be similar with a value type. It is as if
> the deficient class `C` were working with boxes for `Q` (indeed that's
> all it sees) while the knowledgeable class `S` is working with true
> values. The NPE seems justifiable in such terms, although there is no
> visible adapter method to switch descriptors in this case.
> The situation is a little odd when looked at the following way: If you
> view nullability as a privilege, then this privilege is enjoyed only
> by deficient classes, ones that have not yet been recompiled to "see"
> that the type `Q` is a value type. Ignorant classes may pass `null`
> back and forth through `Q` APIs, all day long, until they pass it
> through a class that knows `Q` is a value. Then an `NPE` will end
> their streak of luck. Is using `null` a privilege? Well, yes, but
> remember also that if `Q` started its career as an object type, it was
> a value-based class, and such classes are documented as being
> null-hostile. The null-passers were in a fool's paradise.
> What if `C` lists `Q` as a value but `S` doesn't? Then the calling
> sequence assigned when `S` was loaded will use references, and these
> references will in fact be pseudo-references to buffered `Q` values
> (or `null`, as just discussed). The knowledgeable method `C.m()Q`
> will never produce a `null` through this API. The JVM will arrange
> to properly clothe the `Q`-value produced by `C.m` into a buffer
> whose pointer can be returned from `S.m`.
> Class hierarchies can be much deeper than just `C` and `S`, and
> overrides can occur at many levels on the way down. Frederic Parain
> has pointed out that the net result seems to be that the first
> (highest) class that declares a given method (with descriptor) also
> gets to determine the calling sequence, which is then imposed on all
> overrides through that class. This leads to a workable implementation
> strategy, based on v-table packing. A class's v-table is packed at
> during the "preparation" phase of class linking, just after loading
> before any subclass v-table is packed. The JVM knows, unambiguously,
> whether a given v-table entry is new to a class, or is being
> reaffirmed from a previous super-class (perhaps with an override,
> perhaps just with an abstract). At this point, a new v-table slot can
> be given a carefully selected internal calling sequence, which will
> then be imposed on all overrides. An old v-table slot will have the
> super's calling sequence imposed on it. In this scheme, the
> interpreter and compiler must examine both the method descriptor and
> some metadata about the v-table slot when performing `invokevirtual`
> or `invokespecial`.
> A method coming in "sideways" from an interface is harder to manage.
> It is reasonable to treat such a method as "owned" by the first proper
> class that makes a v-table entry for it. But that only works for one
> class hierarchy; the same method might show up in a different
> hierarchy with incompatible opinions about value types in the method
> signature. It appears that interface default methods, if not class
> methods, must be prepared to use more than one kind of calling
> sequence, in some cases. It is as if, when a class uses a default
> method, it imports that method and adjusts the method's calling
> sequence to agree with that class's hierarchy.
> Often an interface default method is completely new to a class
> hierarchy. In that case, the interface can choose the calling
> sequence, and this is likely to provide more coherent calling
> sequences for that API point.
> These complexities will need watching as value types proliferate and
> begin to show up in interface-based APIs.
> ## Value types and the verifier
> Let us assume that, if the verifier sees a value type, it should flag
> all invalid uses of that value type immediately, rather than wait for
> (This assumption can be relaxed, in which case many points in this
> section can be dropped. We may also try to get away with implementing
> as few of these checks as possible, saving them for a later release.)
> When verifying a method, the verifier tracks and checks types by name,
> mostly. Sometimes it pre-loads classes to see the class hierarchy.
> With the `ValueTypes` attribute, there is no need to pre-load value
> classes; the symbolic method is sufficient.
> The verifier type system needs a way to distinguish value types from
> regular object types. To keep the changes small, this distinction can
> be expressed as a local predicate on type names called `isValueType`,
> implemented by referring to `ValueTypes`. In this way, the
> `StackMapTable` attribute does not need any change at all. Nor does
> the verifier type system need a change: value types go under the
> `Object` and `Reference` categories, despite the fact that value types
> are not object types, and values are not references.
> The verifier rules need to consult `isValueType` at some points. The
> assignability rules for `null` must be adjusted to exclude value
> isAssignable(null, class(X, _)) :- not(isValueType(X)).
> This one change triggers widespread null rejection: wherever a value
> type is required, the verifier will not allow a `null` to be on the
> stack. Assuming `null` is on the stack and `Q` is a value type, the
> following will be rejected as a consequence of the above change:
> - `putfield` or `putstatic` to a field of type `Q`
> - `areturn` to a return type `Q`
> - any `invoke` passing `null` to a parameter of type `Q`
> - any `invoke` passing `null` to a receiver of type `Q` (but this is rare)
> Given comprehensive null blocking (along other paths also), the
> implementation of the `putfield` (or `withfield`) instruction could go
> ahead and pull a buffered value off the stack without first checking
> for `null`. If the verifier does not actually reject such `null`s,
> the dynamic behavior of the bytecodes themselves should, to prevent
> null pollution from spreading.
> The verifier rules for `aastore` and `checkcast` only check that the
> input type is an object reference of some sort. More narrow type
> checks are performed at runtime. A null may be rejected dynamically
> by these instructions, but the verifier logic does not need to track
> `null`s for them.
> The verifier rules for `invokespecial` have special cases for `<init>`
> methods, but these do not need special treatment, since such calls
> will fail to link when applied to a value type receiver.
> The verifier _could_ reject reference comparisons between value types
> other operands (including `null`, other value types, and reference
> types). This would look something like an extra pair of constraints
> after the main assertion that two references are on the stack:
> instructionIsTypeSafe(if_acmpeq(Target), Environment, _Offset, StackFrame,
> NextStackFrame, ExceptionStackFrame) :-
> canPop(StackFrame, [reference, reference], NextStackFrame),
> + not( canPop(StackFrame, [_, class(X, _)], _), isValueType(X) ),
> + not( canPop(StackFrame, [class(X, _), _], _), isValueType(X) ),
> targetIsTypeSafe(Environment, NextStackFrame, Target),
> exceptionStackFrame(StackFrame, ExceptionStackFrame).
> (The JVMS doesn't use any such `not` operator. The actual Prolog
> changes would be more complex, perhaps requiring a `real_reference`
> target type instead of `reference`.)
> This point applies equally to `if_acmpeq`, `if_acmpne`, `if_null`, and
> This doesn't seem to be worth while, although it might be
> interesting to try to catch javac bugs this way. In any case, such
> comparisons are guaranteed to return `false` in L-world, and will
> optimize quickly in the JIT.
> In a similar vein, the verifier _could_ reject `monitorenter` and
> `monitorexit` instructions when they apply to value types:
> instructionIsTypeSafe(monitorenter, _Environment, _Offset, StackFrame,
> NextStackFrame, ExceptionStackFrame) :-
> canPop(StackFrame, [reference], NextStackFrame),
> + not( canPop(StackFrame, [class(X, _)], _), isValueType(X) ),
> exceptionStackFrame(StackFrame, ExceptionStackFrame).
> And a `new` or `putfield` could be quickly rejected if it applies to a
> value type:
> instructionIsTypeSafe(new(CP), Environment, Offset, StackFrame,
> NextStackFrame, ExceptionStackFrame) :-
> StackFrame = frame(Locals, OperandStack, Flags),
> CP = class(X, _),
> + not( isValueType(X) ),
> instructionIsTypeSafe(putfield(CP), Environment, _Offset, StackFrame,
> NextStackFrame, ExceptionStackFrame) :-
> CP = field(FieldClass, FieldName, FieldDescriptor),
> + not( isValueType(FieldClass) ),
> Likewise `withfield` could be rejected by the verifier if applied to a
> non-value type.
> The effect of any or all of these verifier rule changes (if we choose
> to implement them) would be to prevent local code from creating a
> `null` and accidentally putting it somewhere a value type belongs, or
> from accidentally applying an identity-sensitive operation to an
> operand _known statically_ to be a value type. These rules only work
> when a sharp verifier type unambiguously reports an operand as `null`
> or as a value type.
> Nulls must also be rejected, and value types detected, when they are
> hidden, at verification time, under looser types like `Object`.
> Protecting local code from outside `null`s must also be done
> Omitting all of these rules will simply shift the responsibility for
> null rejection and value detection fully to dynamic checks at
> execution time, but such dynamic checks must be implemented in any
> case, so the verifier's help is mainly an earlier error check,
> especially to prevent null pollution inside of a single stack frame.
> For that reason, the only really important verifier change is the
> `isAssignable` adjustment, mentioned first.
> The dynamic checks which back up or replace the other verifier checks
> will be discussed shortly.
> ## Value types and legacy classfiles
> We need to discuss the awkward situation of `null` being passed as a
> value type, and value types being operated on as objects, by legacy
> classfiles. One legacy classfile can dump null values into surprising
> places, even if all the other classfiles are scrupulous about
> containing `null`.
> We will also observe some of the effects of having value types
> "invade" a legacy classfile which expects to apply identity-sensitive
> operations to them.
> By "legacy classfile" we of course mean classfiles which lack
> `ValueTypes` attributes, and which may attempt to misuse value types
> in some way. (Force of habit: it's strong.) We also can envision
> half-way cases where a legacy classfile has a `ValueTypes` attribute
> which is not fully up to date. In any case, there is a type `Q` which
> is _not_ locally declared as a value type, by the legacy class `C`.
> The first bad thing that can happen is that `C` declares a field of
> type `Q`. This field will be formatted as a reference field, even
> though the field type is a value type. Although we implementors might
> grumble a bit, the JVM will have to arrange to use pseudo-pointers to
> represent values stored in that field. (It's as if the field were
> volatile, or not flattenable for some other reason.) That wasn't too
> bad, but look what's in the field to start with: It's a null. That
> means that any legitmate operation on this initial value will throw an
> `NPE`. Of course, the writer of `C` knew `Q` as a value-based class,
> so the initial null will be discarded and replaced by a suitable
> non-null value, before anything else happens.
> What if `C` makes a mistake, and passes a `null` to another class
> which _does_ know `Q` is a value? At that point we have a choice, as
> with the verifier's null rejection whether to do more work to detect
> the problem earlier, or whether to let the `null` flow through and
> eventually cause an `NPE` down the line. Recall that if an API point
> gets a calling sequence which recognizes that `Q` is a value type, it
> will probably unbuffer the value, throwing `NPE` immediately if `C`
> makes a mistake. This is good, because that's the earliest we could
> hope to flag the mistake. But if the method accepts the boxed form of
> `Q`, then the `null` will sneak in, skulk around in the callee's stack
> frame, and maybe cause an error later.
> Meanwhile, if the JVM tries to optimize the callee, it will have to
> limit its optimizations somewhat, because the argument value is
> nullable (even if only ever by mistake). To cover this case, it may
> be useful to define that _method entry_ to a method that knows about
> `Q` is null-hostile, even if the _calling sequence_ for some reason
> allows references. This means that, at function entry, every known
> value type parameter is null-checked. This needs to be an official
> rule in the JVM, not just an optimization for the JIT, in order for
> the JIT to use it.
> What if our `C` returns a `null` value to a caller who intends to use
> it as a value? That won't go well either, but unless we detect the
> `null` aggressively, it might rattle around for a while, disrupting
> optimization, before produing an inscrutable error. ("Where'd that
> `null` come from??"). The same logic applies as with arguments: When
> a `null` is returned from a method call that purports to return `Q`,
> this can only be from a legacy file, and the calling sequences were
> somehow not upgraded. In that case, the JVM needs to mandate a null
> check on every method invocation which is known to return a value
> The same point also applies if another class `A`, knowing `Q` as a
> value type, happens to load a `null` from one of `C`'s fields. The
> `C` field is formatted as a reference, and thus can hand `A` a
> surprise `null`, but `A` must refuse to see it, and throw `NPE`.
> Thus, the `getfield` instruction, if it is pointed at a legacy
> non-flattened field, will need to null-check the value loaded
> from the field.
> Meanwhile, `C` is allowed to `putfield` and `getfield` `null` all day
> long into its own fields (and fields of other benighted legacy classes
> that it may be friends with). Thus, the `getfield` and `putfield`
> instructions link to slightly different behavior, not only based on
> the format of the field, but _also_ based on "who's asking". Code in
> `C` is allowed to witness `null`s in its `Q` fields, but code in `A`
> (upgraded) is _not_ allowed to see them, even though it's the same
> `getfield` to the same symbolic reference. Happily, fields are not
> shared widely across uncoordinated classfiles, so this is a corner
> case mainly for testers to worry about.
> What if `C` stores a `null` into somebody else's `Q` field, or into an
> element of a `Q` array? In that case, `C` must throw an immediate
> `NPE`; there's no way to reformat someone else's data structure,
> however out-of-date `C` may be.
> What if `C` gets a null value from somewhere and casts it to `Q`?
> Should the `checkcast` throw `NPE` (as it should in a classfile where
> `Q` is known to be a value type)? For compatibility, the answer is
> "no"; old code needs to be left undisturbed if possible. After all,
> `C` believes it has a legitimate need for `null`s, and won't be fixed
> until it is recompiled and its programmer fixes the source code.
> That's about it for `null`. If the above dynamic checks are
> implemented, then legacy classfiles will be unable to disturb upgraded
> classfiles with surprise null values. The goal mentioned above
> about controlling `null` on all paths is fulfilled blocking `null`
> across API calls (which might have a legacy class on one end), and by
> verifying that `null`s never mix with values, locally within a single
> stack frame.
> There are a few other things `C`'s could do to abuse `Q` values.
> Legacy code needs to be prevented immediately from making any of the
> following mistakes:
> - `new` of `Q` should throw `ICCE`
> - `putfield` to a field of `Q` should throw `ICCE`
> - `monitorenter`, `monitorexit` on a `Q` value should throw `IllegalMonitorStateException`
> Happily, the above rules are not specific to legacy code but apply
> uniformly everywhere.
> A final mistake is executing an `acmp` instruction on a value type.
> Again, this is possible everywhere, not just in legacy files, even if
> the verifier tries to prevent the obvious occurrences. There are
> several options for `acmp` on value types. The option which breaks
> the least code and preserves the O(1) performance model of `acmp` is
> to quickly detect a value type operand and just report `false`, even
> if the JVM can tell, somehow, that it's the same buffer containing the
> same value, being compared to itself.
> All of these mistakes can be explained by analogy, supposing that the
> legacy class `C` were working with a box type `Integer` where other
> classes had been recoded to use `int`. All variables under `C`'s
> control are nullable, but when it works with new code it sees only
> `int` variables. Implicit conversions sometimes throw `NPE`, and
> `acmp` (or `monitorenter`) operations on boxed `Integer` values yield
> unspecific (or nonsensical) results.
> ## Value types and instruction linkage
> Linked instructions which are clearly wrong should throw a
> `LinkageError` of some type. Examples already given are `new` and
> `putfield` on value types.
> When a field reference of value type is linked it will have to
> correctly select the behavior required by both the physical layout of
> the field, and also the stance toward any possible `null` if the field
> is nullable. (As argued above, the stance is either lenient for
> legacy code or strict for new code.)
> A `getstatic` linkage may elect to replace an invisible `null` with
> a default value.
> When an `invoke` is linked it will have to arrange to correctly
> execute the calling sequence assigned to its method or its v-table.
> Linkage of `invokeinterface` will be even more dynamic, since the
> calling sequence cannot be determined until the receiver class is
> Linkage of dynamic constants in the constant pool must reject `null`
> for value types. Value types can be determined either globally based
> on the resolved constant type, or locally based on the `ValueTypes`
> attribute associated with the constant pool in which the resolution
> ## Value types and instruction execution
> Most of the required dynamic behaviors to support value type hygiene
> have already been mentioned. Since values are identity-free and
> non-nullable, the basic requirement is to avoid storing `null`s in
> value-type variables, and degrade gracefully when value types are
> queried about their identities. A secondary requirement is to support
> the needs of legacy code.
> For null hygeine, the following points apply:
> - A nullable argument, return value (from a callee),
> or loaded field must be null-checked before being further
> processed in the current frame, if its descriptor is locally
> declared as a value type.
> - `checkcast` should reject `null` for _locally_ declared value
> types, but not for others.
> - If the verifier does not reject `null`, the `areturn`, `putfield`
> `withfield` instructions should do so dynamically. (Otherwise the
> other rules are sufficient to contain `null`s.)
> - An `aastore` to a value type array (`Q`) should reject `null`
> even if the array happens to use invisible indirections as an
> implementation tactic (say, for jumbo values). This is a purely
> dynamic behavior, not affected by the `ValueTypes` attribute.
> Linked field and invoke instructions need sufficient linkage metadata
> to correctly flatten instance fields and use unboxed (and/or `null`
> hostile) calling sequences.
> As discussed above, the `acmp` must short circuit on values. This is
> a dynamic behavior, not affected by the `ValueTypes` attribute.
> Generally speaking, any instruction that doesn't refer to the constant
> pool cannot have contextual behavior, because there is no place to
> store metadata to adjust the behavior. The `areturn` instruction is
> an exception to this observation; it is a candidate for bytecode
> rewriting to gate the extra null check for applicable methods.
> ## Value types and reflection
> Some adjustments may be needed for the various reflection APIs, in
> order to bring them into alignment with the changed bytecode.
> - `Class.cast` should be given a null-hostile partner
> `Class.castValue`, to emulate the updated `checkcast` semantics.
> - `Field` should be given a dynamic `with` to emulate `withfield`,
> and the `Lookup` API given a way to surface the corresponding MH.
> - `Class.getValueTypes`, to reflect the attribute, may be useful.
> ## Conclusions
> The details are complex, but the story as a whole becomes more
> intelligible when we require each classfile to locally declare its
> value types, and handle all values appropriately according to the
> local declaration.
> Outside of legacy code, and at its boundaries, tight control of null
> values is feasible. Inside value-rich code, and across value-rich
> APIs, full optimization seems within reach.
> Potential problems with ambiguity in L-world are effectively addressed
> by a systematic side channel for local value type declarations,
> assisting the interpratation of `L`-type descriptors. This side
> channel can be the `ValueTypes` attribute.
More information about the valhalla-spec-experts