RFR(xs): (aix but affects shared code too) 8186665: buffer overflow in Java_java_nio_MappedByteBuffer_isLoaded0

Peter Levart peter.levart at gmail.com
Thu Oct 19 20:42:19 UTC 2017

Hi Thomas,

Right. I can understand the situation and potential problems of 
introducing API for mmappedPageSize. So let's keep pretending that page 
size is uniform for all memory regions used by VM and see where this 
brings us. The change fixes the problem, although in a hack-ish way. It 
will be good for now.

Regards, Peter

On 10/19/17 15:21, Thomas Stüfe wrote:
> Hi Peter, Christoph,
> if you have no objections, I'd like to push this change. As I 
> explained in my earlier mail, I'd prefer not to change 
> MappedByteBuffer::load(), and if you are fine with the change in its 
> current form 
> (http://cr.openjdk.java.net/~stuefe/webrevs/8186665-buffer-overflow-in-mincore/webrev.02/webrev/ 
> <http://cr.openjdk.java.net/%7Estuefe/webrevs/8186665-buffer-overflow-in-mincore/webrev.02/webrev/>), 
> I'd like to push it.
> Thanks, Thomas
> On Wed, Oct 18, 2017 at 12:24 PM, Thomas Stüfe 
> <thomas.stuefe at gmail.com <mailto:thomas.stuefe at gmail.com>> wrote:
>     Hi Peter, Christoph,
>     Thank you both for reviewing.
>     New webrev:
>     http://cr.openjdk.java.net/~stuefe/webrevs/8186665-buffer-overflow-in-mincore/webrev.02/webrev/
>     <http://cr.openjdk.java.net/%7Estuefe/webrevs/8186665-buffer-overflow-in-mincore/webrev.02/webrev/>
>     @Peter:
>     >Shouldn't the following line:
>     >
>     >  47     return len2 + pagesize - 1 / pagesize;
>     >
>     >..be written as:
>     >
>     >           return (len2 + pagesize - 1) / pagesize;
>     You are right. Did not cause the mincore output buffer to be
>     unnecessarily large. Thanks for catching this.
>     As for your other concern:
>     On Wed, Oct 18, 2017 at 10:32 AM, Peter Levart
>     <peter.levart at gmail.com <mailto:peter.levart at gmail.com>> wrote:
>>         --
>>         In Java_java_nio_MappedByteBuffer_isLoaded0, we call
>>         mincore(2) to retrieve the paging status of an address range.
>>         The size of the output buffer for mincore(2) depends on the
>>         number of pages in *system page size* in the given memory
>>         range (this is spelled out more or less explicitly on AIX and
>>         Linux, nothing is said on BSD/OSX, but I assume the same).
>>         The number of pages in the memory range is calculated by
>>         MappedByteBuffer.isLoaded() and handed down to
>>         Java_java_nio_MappedByteBuffer_isLoaded0() together with the
>>         memory range to test.
>>         MappedByteBuffer.isLoaded() calculates this number of pages
>>         based on jjdk.internal.misc.Unsafe.pagesize(), which
>>         ultimately comes down to os::vm_page_size().
>>         For AIX, os::vm_page_size() may return a page size larger
>>         than the system page size of 4K. The reason for this is that
>>         on AIX, memory can be backed by different page sizes, usually
>>         either 4K or 64K - e.g. posix thread stacks may have 4K
>>         pages, java heap (system V shared memory) with 64K pages, but
>>         mmap memory is always 4K page backed...
>         If this is true and Unsafe.pagesize() returns a value > 4K,
>         then perhaps also the MappedByteBuffer.load() method is wrong
>         for AIX?
>             public final MappedByteBuffer load() {
>                 checkMapped();
>                 if ((address == 0) || (capacity() == 0))
>                     return this;
>                 long offset = mappingOffset();
>                 long length = mappingLength(offset);
>                 load0(mappingAddress(offset), length);
>                 // Read a byte from each page to bring it into memory.
>         A checksum
>                 // is computed as we go along to prevent the compiler
>         from otherwise
>                 // considering the loop as dead code.
>                 Unsafe unsafe = Unsafe.getUnsafe();
>                 int ps = Bits.pageSize(); // << LOOK HERE
>                 int count = Bits.pageCount(length);
>                 long a = mappingAddress(offset);
>                 byte x = 0;
>                 for (int i=0; i<count; i++) {
>                     x ^= unsafe.getByte(a);
>                     a += ps; // << AND HERE
>                 }
>                 if (unused != 0)
>                     unused = x;
>                 return this;
>             }
>         ...this loop reads a byte from the start of each block in
>         lumps of Bits.pageSize(). Should it always read in lumps of 4K
>         for AIX? Do we rather need a special Unsafe.mmappedPageSize()
>         method instead of just a hack in isLoaded0 ?
>     Yes, I considered this too. In effect, on AIX, we only touch every
>     16th page, thereby reducing MappedByteBuffer::load() to something
>     like load_every_16th_page... However, this bug is very old (even
>     our 1.4 VM already does this when the touching was still
>     implemented in MappedByteBuffer.c) and did not cause any problems
>     AFAIK.
>     The story behind this is long and quite boring :) basically, 64k
>     pages are used for the java heap and give a large performance
>     bonus over 4K paged java heap. But we cannot switch all memory
>     regions to 64K pages, so we live with multiple page sizes and
>     above us we have a ton of code which assumes one consistent page
>     size for everything. So we lie about the page size to everyone -
>     claiming system page size to be 64k - and except for very rare
>     cases like this one get away with this.
>     I would like to keep lying consistently. There is not a hard
>     reason for it, just that I am afraid that starting to publish a
>     different page size to parts of the VM will confuse things and may
>     introduce errors further down the line.
>     I think a proper solution would be to keep page size on a
>     per-ByteBuffer base, because ByteBuffers may be allocated in
>     different memory regions - they are now allocated with mmap() in
>     system page size, but that may change in the future. That is
>     assuming that one byte buffer cannot span areas of multiple page
>     sizes, which would complicate matters further.
>     Btw, I also wondered whether other platforms could have a clash
>     between the real memory page size and MappedByteBuffer's notion of
>     that size - e.g. whether it is possible to have MappedByteBuffers
>     with huge pages on Linux. But all cases I could think of are cases
>     where the page size the JDK would assume is smaller than the
>     actual page size, which would not be a problem for both mincore
>     and load/touch. In the above example (huge pages on Linux), pages
>     would be pinned anyway, so load() and isLoaded() would be noops.
>     @Christoph:
>     > apart from the point that Peter found, I’d also think it would
>     look better if the typedef section (line 51-56) would be placed
>     before the AIX only function (line 41-49).
>     Sure. I moved the section up, below the includes.
>     Kind Regards, Thomas

More information about the core-libs-dev mailing list